It is currently Mon Aug 21, 2017 7:10 am


All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: UC-Davis MicroMUMPS
PostPosted: Fri Nov 12, 2010 8:50 am 
User avatar

Joined: Fri Nov 05, 2010 5:50 am
Posts: 19
Location: Pittsburg, California
Real Name: Chris Richardson
Began Programming in MUMPS: 07 Sep 1977
UC-Davis MUMPS version 5.23 (single user)
Download from http://207.192.157.194/mdc/UCD_5_23.zip
For more versions and documentation, see ftp://take.cs.ucdavis.edu/MicroMDist.
Versions for CP/M are available at http://www.retroarchive.org which has source in 8080 code for version 2.62, and compiled versions of 2.x and 4.x.

This is a class project lead by Dr. Richard Walters. It ran on MS-DOS and was available from University of California at Davis for a nominal fee. It was mostly experimental, but amazingly small. Small enough to run on one of the old luggable Osborne computers with only two floppy drives. We are not sure it is still available, but it is certainly worth mentioning.


Top
Offline Profile  
 
 Post subject: Re: UC-Davis MicroMUMPS
PostPosted: Sun Nov 28, 2010 7:40 pm 
User avatar

Joined: Fri Nov 05, 2010 11:20 am
Posts: 16
Location: Portland, Oregon
Real Name: Martin Mendelson
Began Programming in MUMPS: 15 Feb 1983
Well I just pulled a 3.5" floppy out with UCD MicroMumps 5.2 on it - all 63 kbytes of the interpreter, plus the .exe routines that set up its environment. I think that it was always a free item, at least Dick Walters always gave me the latest version for nothing.
I first ran MicroMumps on a Heathkit H8 with a Z80 processor, 64k of RAM and two 5 1/4" floppy drives under CP/M. Not only could its tiny footprint fit on that machine, but so did Fileman 17. It made it possible for me to set up a clinic registration and scheduling system for the UC Davis Family Medicine residency program that were then ported right over to ISM on the clinic's DEC LSI-11/23. Amazing what we could do with so little!


Top
Offline Profile  
 
 Post subject: Re: UC-Davis MicroMUMPS
PostPosted: Tue Dec 21, 2010 3:12 pm 
Site Admin

Joined: Mon Nov 01, 2010 1:31 pm
Posts: 10
Location: Las Cruces, NM 88012 USA
Real Name: LD "Gus" Landis
Began Programming in MUMPS: 15 Aug 1991
The links do not work for me (Dec 21, 2010).

_________________
3960 Schooner Loop 651-340-4007
Las Cruces, NM 88012-6067


Top
Offline Profile  
 
 Post subject: Re: UC-Davis MicroMUMPS
PostPosted: Fri Jan 03, 2014 9:32 am 

Joined: Fri Jan 03, 2014 1:48 am
Posts: 5
Real Name: Marcelo Dantas
Began Programming in MUMPS: 01 Jan 1986
Hi everyone,

I am (desperately) looking for the Micromumps version 4.06 for CP/M (or maybe a later version, but for CP/M) ... I have found a version online but it is broken. In fact I need the SETGLOB.COM, SETMUMPS.COM and ERRORS.DAT mainly.
I am not sure if anyone will read this, but if anyone can help I would be grateful.

Thanks a lot,
Marcelo.


Top
Offline Profile  
 
 Post subject: Re: UC-Davis MicroMUMPS
PostPosted: Wed Oct 28, 2015 3:40 pm 
User avatar

Joined: Wed Nov 17, 2010 4:02 pm
Posts: 68
Location: Houston TX
Real Name: David Whitten
Began Programming in MUMPS: 06 Jan 1982
I think the MicroMUMPS can be downloaded from http://71.174.62.16/MDC/UCD_5_23.zip
I just used that link, and got a valid file.

Dave


Attachments:
UCD_5_23.zip [138.71 KiB]
Downloaded 452 times
Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net