Mumpster http://www.mumpster.org/ |
|
VAFileMan & VAKernel in MV1 http://www.mumpster.org/viewtopic.php?f=13&t=1663 |
Page 1 of 1 |
Author: | cais28 [ Sat Nov 12, 2011 1:13 am ] |
Post subject: | VAFileMan & VAKernel in MV1 |
Hi all (First: Im never used VA , but interest ...) Somebody convert VAFileman21 and VAKernel8.0 to MV1 ? Im change source Code of DINZMGR and make a new DINZMV1(MV1 Standards) . DINZMGR runing done . OK . In DINIT routine have some syntax incompatibility .... Did somebody do the conversion already? Is somebody else an idea? Thanx |
Author: | tlwiechmann [ Sat Nov 12, 2011 5:08 am ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
I tried to convert EsiObjects to MV1 and found a bug that was a stopper. The construct: $TEXT(@L+O) where L is a label (name) and O is the offset (integer) has problems. Unless it was fixed recently, regardless of the value of O, it will always return the line pointed to by L. EsiObjects has about 100 references like this. File Manager has about 40. I have no idea how many Kernel and VistA have. Clearly, changing the code to get around this is not an option. Before either of these packages (an others I presume) will run on MV1, this needs to be fixed. Of course, there may be other problems that I don't know about. The real issue is this group needs to put together a development team that would be willing to take responsibility for further development of MV1. Someone proficient in C will be essential. With a good development team behind it, MV1 has the potential of being a viable MUMPS system. Without that effort, IMHO it won't be taken seriously. |
Author: | cais28 [ Sat Nov 12, 2011 7:10 am ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
Hello Terry ( I remember, I liked ESIObject What exactly the problem , I do not understand it . In MV1 working a $Text with indirection : S RTN="DINZMV1" W $T(+1^@RTN) This "formula" working pefect . Problem with only parameter sequence ? One full source code conversion routine (written in MUMPS) , would be a bad solution? If we do not found a C programmer , then to me only this way .... |
Author: | petero [ Mon Feb 20, 2012 8:25 pm ] | |||
Post subject: | Re: VAFileMan & VAKernel in MV1 | |||
Hi Josef et al, Have some good news for those who want to see running VA FileMan on MUMPS V1. I spent some time to localize few misterious MUMPS V1 erorrs during the fileman installation. Now, with Ray's prompt response fixing the bugs, I've got it finally running! Attached files: README_FM22.TXT basic intro read me file ZIPPED_FM22_PART1.tar supporting routines, globals + console log file of the installation Note: due to the limitted size of uploads the fm22 routines are not posted here. You can download the file from http://sourceforge.net/projects/vista-f ... irror=iweb Best, Peter
|
Author: | cais28 [ Tue Feb 21, 2012 3:00 am ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
Hi Peter Greath !!! Im will try it ! (MV1.54 is more..more capable .... and next test : ESIObject ! ) Thanx Peter |
Author: | raynewman [ Tue Feb 21, 2012 3:50 am ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
Hi All, Expanding on Peter's great work, I have loaded his code + VISTA code into a MUMPS database, compressed it and loaded it up to sourceforge. It's about 8MB but expands to 5GB on unpacking. To get it, download: http://sourceforge.net/projects/mumps/f ... z/download then: sudo tar -C / -xzvf mumps-vista-1.54.tar.gz then: read /usr/vista/A-README-VISTA I know little of VISTA, so have a look then let's figure out the next step. Ray Newman |
Author: | tlwiechmann [ Tue Feb 21, 2012 11:18 am ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
Regarding loading Peter's FM to MV1, I found the following problems. I'm running the latest MV1 built for Ubuntu.
|
Author: | raynewman [ Tue Feb 21, 2012 1:35 pm ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
Hi, I also noticed that as I prepared the VISTA database image. Would appreciate someone more knowledgeable in fileman to let me know what the problem is. Use either the cvs or one on the images with the VISTA database as the other distributions haven't been updated yet. Ray |
Author: | raynewman [ Thu Feb 23, 2012 2:39 am ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
I have upgraded all sourceforge downloads - available files are: mumps-1.55-FreeBSD.8.2-RELEASE.tar.gz mumps-1.55-linux.2.6.32-38.Ubuntu.tar.gz mumps-1.55-osx-10.7.3.tar.gz mumps-1.55-src.tar.gz mumps-vista-1.55.tar.gz Ray Newman |
Author: | cais28 [ Tue Mar 13, 2012 12:50 pm ] |
Post subject: | Re: VAFileMan & VAKernel in MV1 |
Hi All Little progress ..... (on FM22 Peter version..) SCREENMAN of FM22 is working .... The compressed fm22.db (31MB) available : http://sourceforge.net/projects/mv1syst ... 8Linux%29/ (include the MV1SysTray2.2 GUI environment) |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |